Marantz SR5010 Owner'S Manual Download

Page: 271 / 288

For DTS patents, see http://patents.dts.com. Manufactured under license

from DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol,

DTS:X, and the DTSX logo are registered trademarks or trademarks of

DTS, Inc. in the United States and/or other countries. © DTS, Inc. All

Rights Reserved.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the

HDMI Logo are trademarks or registered trademarks of HDMI Licensing

LLC in the United States and other countries.
This item incorporates copy protection technology that is protected by

U.S. patents and other intellectual property rights of Rovi Corporation.

Reverse engineering and disassembly are prohibited.

The Wi-Fi CERTIFIED logo is a registered trademark of the Wi-Fi

Alliance.

Wi-Fi Certification provides assurance that the device has passed the

interoperability test conducted by the Wi-Fi Alliance, a group that certifies

interoperability among wireless LAN devices.

Adobe, the Adobe logo and Reader are either registered trademarks or

trademarks of Adobe Systems Incorporated in the United States and/or

other countries.

Contents

Connections

Playback

Settings

Tips

Appendix

271

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for SR5010
































































































































































































































































































Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands

Marantz SR5010, Owner'S Manual

Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands