Marantz SR5010 Owner'S Manual Download

Page: 72 / 288

Listening to music on an iPod

Connect the iPod to the USB port. (

p. 59)

Press iPod/USB to switch the input source to “iPod/

USB”.

“Browse from iPod” is displayed on the display of this unit.

Nothing is displayed on the TV screen.

Operate iPod itself while seeing the iPod screen to play

back music.

“iPod Browse Mode” has two modes, “From iPod” and “On-Screen”. The default

setting is “From iPod” that operate the iPod itself while looking at the iPod screen.

To change to “On-Screen”, where you perform operations while having the iPod

information displayed on the TV screen, see “iPod Browse Mode settings”

(

p. 73).

NOTE

Depending on the type of iPod and the software version, some functions may not

operate.

Note that Marantz will accept no responsibility whatsoever for any problems

arising with the data on an iPod when using this unit in conjunction with the iPod.

Operations accessible through the option

menu

This can be operated when the “iPod Browse Mode” is set to “From

iPod”. (

p. 73)

“iPod Browse Mode settings” (

p. 73)

“Adjusting the volume of each channel to match the input source

(Channel Level Adjust)” (

p. 113)

“Adjusting the tone (Tone)” (

p. 114)

“Displaying your desired video during audio playback (Video

Select)” (

p. 115)

“Adjusting the picture quality for your viewing environment (Picture

Mode)” (

p. 116)

“Playing the same music in all zones (All Zone Stereo)” (

p. 117)

Contents

Connections

Playback

Settings

Tips

Appendix

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for SR5010
































































































































































































































































































Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands

Marantz SR5010, Owner'S Manual

Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands