Marantz SR5010 Owner'S Manual Download

Page: 73 / 288

iPod Browse Mode settings

In this mode, various lists and screens during playback on the iPod are

displayed on the TV screen.
This section describes the steps up to playing back tracks on the iPod in

“On-Screen”.

Press OPTION when the input source is “iPod/USB”.

The option menu screen is displayed.

Select “iPod Browse Mode”, then press ENTER.

The “iPod Browse Mode” screen is displayed.

Use

to select “On-Screen”, then press ENTER.

Operations available for “On-Screen” and “From iPod” are listed

below.

iPod Browse Mode

From iPod

On-Screen

Playable

files

Music file

Video file

Active

buttons

Remote control

unit (This unit)

iPod

Only the sound is played.

Use

to select the file to be played, then press

ENTER.

Playback starts.

Operation buttons

Function

Playback / Pause

Skip to previous track / Skip to next track
(Press and hold) Fast-reverse/Fast-forward

ENTER

Playback / Pause
(Press and hold) Stop

Skip to previous track / Skip to next track
(Press and hold) Fast-reverse / Fast-

forward

CH/PAGE

Switch to the previous page/next page in

the list display

The actions of the operation buttons may differ.

The display switches between track title, artist name, and album title etc. each time

the main unit’s STATUS is pressed during playback with “iPod Browse Mode” set

to “On-Screen”.

English letters, numbers and certain symbols are displayed. Incompatible

characters are displayed as “.” (period).

Contents

Connections

Playback

Settings

Tips

Appendix

Front panel

Display

Rear panel

Remote

Index

Summary of Contents for SR5010
































































































































































































































































































Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands

Marantz SR5010, Owner'S Manual

Search results

Summary of Contents for SR5010

Reviews:

Related manuals for SR5010

Brands by name

Popular brands