Marantz SR5011 Owner'S Manual Download

Page: 171 / 320

Video

Make video-related settings.

Picture Adjust

Picture quality can be adjusted.

Can be set when the “Video Conversion” setting is “On”. (

p. 180)

Can be set when “HDMI”, “COMP” or “VIDEO” is assigned for each input source.

(

p. 186)

“Contrast”, “Brightness”, “Saturation”, “Noise Reduction” and “Enhancer” can be

set when “Picture Mode” is set to “Custom”. (

p. 123)

“Picture Adjust” settings are stored for each input source.

“Picture Adjust” cannot be set when 4K signals are input.

Picture Mode

Select the desired picture mode according to the video content and

your viewing environment.

Standard:

The standard mode suited for most living

room viewing environments.

Movie:

A mode suited for watching movies in a

dark room such as a theater room.

Vivid:

A mode that makes graphic images for

games, etc. brighter and more vivid.

Streaming:

A mode suited for low bit rate video

sources.

ISF Day:

A mode suited for watching movies in a

bright room during the day.

ISF Night:

A mode suited for watching movies in a

dark room at night.

Custom:

Adjusts the picture quality manually.

Off:

No picture quality adjustment is done with

this unit.

171

Summary of Contents for SR5011































































































































































































































































































































Search results

Summary of Contents for SR5011

Reviews:

Related manuals for SR5011

Brands by name

Popular brands

Marantz SR5011, Owner'S Manual

Search results

Summary of Contents for SR5011

Reviews:

Related manuals for SR5011

Brands by name

Popular brands