Marantz SR5015 Owner'S Manual Download

Page: 33 / 305

This unit is compatible with Dolby Atmos and DTS:X which offers an even wider

and deeper surround sensation.

The “Speaker Virtualizer” must be set to “On” for Dolby Atmos playback with 5.1-

channel speaker configurations or less. (

p. 178)

DTS:X can be selected regardless of the speaker configuration.

Use the illustration below as a guide for how high each speaker should be

installed. The height does not need to be exactly the same.

Front height
speaker

1: 30° – 45°

2: 30° – 55°

3: 65° – 100°

Viewed from the side

Top middle speaker

Top front speaker

Front speaker

Surround
speaker

Surround
back
speaker

Point slightly
downwards

FHL

TML

TFL

FHR

TMR

TFR

Height speakers layout

Viewed from the top

Summary of Contents for SR5015

















































































































































































































































































































Search results

Summary of Contents for SR5015

Reviews:

Related manuals for SR5015

Brands by name

Popular brands

Marantz SR5015, Owner'S Manual

Search results

Summary of Contents for SR5015

Reviews:

Related manuals for SR5015

Brands by name

Popular brands