Paths to be confirmed
Display
Settings
What to confirm
8 Front Height
A14FH
***.*dB
Input Source : CBL/SAT
Input Mode : Auto
Sound mode : MULTI CH STEREO
Amp assign : 9.1ch
Floor Layout : 5ch
Height Sp : 4ch
Dolby Sp : None
Height Layout : Top Front & Top Rear
MAIN ZONE : On
ZONE2 : Off
・Analog input ⇒ Speaker output (Height1 L/R (Top Front), Height2 L/R (Top Front))
・ Analog input ⇒ Pre OUT output (Height1 L/R (Top Front), Height2 L/R (Top Rear))
・ Pre OUT output
(
b
The input source can be switched to any source except CBL/SAT.)
(
b
Volume 60 is the value when Absolute settings are used. The value is -20 when Relative set-
tings are used)
9 7.1ch
A197.1IN
***.*dB
Input Source : CBL/SAT
Input Mode : 7.1Ch In
Amp Assign : 9.1ch
Floor Layout : 5ch&SB
Height Sp : None
Dolby Sp : None
Speaker Config ALL Speaker = Small/SW = Yes(2ch)
・ 7.1ch IN input ⇒ Speaker output (Front L/R, Center, Surround L/R, S.Back L/R)
・ Pre OUT output (Front L/R, Center, Surround L/R, S.Back L/R, Subwoofer1/2)
10 Front Amp ⇒ Sur-
round Back
A20SB
***.*dB
Input Source : CBL/SAT
Input Mode : Auto
Sound mode : MULTI CH STEREO
Amp assign : 11.1ch
Height Speakers : 4Height Speakers
Height Layout : Top Front & Top Rear
Pre OUT Channel : Front
Speaker Select : Floor & Height
MAIN ZONE : On
ZONE2 : Off
・ Analog input ⇒ Speaker output (S.Back L/R)
・ Pre OUT output
(
b
The input source can be switched to any source except CBL/SAT.)
(
b
Volume 60 is the value when Absolute settings are used. The value is -20 when Relative set-
tings are used)
148
Caution in
servicing
Electrical
Mechanical
Repair Information
Updating
