Marantz SR6012 Owner'S Manual Download

Page: 221 / 311

Settings

Configure the IP address.

If you are using a broadband router (DHCP function), the information

required for network connection such as the IP address will be

automatically configured since the DHCP function is set to “On” in the

default settings of this unit.

Set up the IP Address, Subnet Mask, Default Gateway and DNS server

information only when assigning a fixed IP address or when connecting

to a network without DHCP function.

DHCP
-IP Address
-Subnet Mask

Save

Cancel

-Default Gateway
-DNS

Configures the network settings automatically or manually

Off

Network/Settings

000.000.000.000
000.000.000.000
000.000.000.000
000.000.000.000

DHCP

Selects how to connect to the network.

(Default)

Configure the network settings

automatically from your router.

Off:

Configure the network settings manually.

IP Address

Set the IP address within the ranges shown below.

The Network Audio function cannot be used if other IP addresses

are set.

CLASS A: 10.0.0.1 - 10.255.255.254
CLASS B: 172.16.0.1 - 172.31.255.254
CLASS C: 192.168.0.1 - 192.168.255.254

Subnet Mask

When connecting an xDSL modem or connector adapter directly to

this unit, input the subnet mask indicated in the documentation

supplied by your provider. Normally input “255.255.255.0”.

221

Summary of Contents for SR6012























































































































































































































































































































Search results

Summary of Contents for SR6012

Reviews:

Related manuals for SR6012

Brands by name

Popular brands

Marantz SR6012, Owner'S Manual

Search results

Summary of Contents for SR6012

Reviews:

Related manuals for SR6012

Brands by name

Popular brands