Marantz SR6300, User Manual

26

ENGLISH

LEARN MODE

The remote controller is capable of learning and memorizing the
remote control codes used by almost any other remote controller you
may already own.
• If no commands have been programmed for a particular function

button, the remote controller will transmit whatever codes have
been factory preset.

• The following example shows how to program your remote

controller and how to use the codes for a DVD player.

LEARNING PROCEDURE

1.

Place the remote controller so that its infrared signal transmitter is
facing the infrared signal receiver on the Marantz remote
controller at a distance of about 5 centimeters.

2.

Press and hold down the 

T.MODE 

⁄1

 and 

MEMO 

¤6

 buttons until

LEARN 

is displayed in the display.

3.

Select the function button to select the function.

• Selected function is displayed and 

LEARN 

is blinking.

4.

Select the button to be learned.

•

LEARN 

is displayed.

5.

Press and hold the button of the original remote controller to learn
until 

OK 

in the display.

• When 

NG 

is displayed, repeat this step.

• When 

FULL 

is displayed, the memory of the RC7300SR is full.

If you want to learn the code, you should erase other learned
button.

6.

Repeat steps 

4

 and 

5

 to learn other buttons in same function.

7.

Repeat steps 

3

 to 

6

 to learn other function.

8.

When you have finished programming the remote controller,
press and hold down the 

OK 

button 

⁄5

 until 

USE 

is displayed in

the display.

Note:

• When NG is displayed in step 5 again, the transmitting code is

unavailable for RC7300SR, or the transmitting signal is
intercepted by noise.

• If no buttons are pressed for approximatelly 1 minutes while in

the LEARN mode, the remote controller automatically returns
to the use mode.

ERASING LEARNING CODE

Erasing the code by buttons

1.

Press and hold down the 

T.MODE 

⁄1

 and 

MEMO 

¤6

 buttons until

LEARN 

is displayed in the display.

2.

Select the function button to select the button to be erased.

• Selected function is displayed and 

LEARN 

is blinking.

3.

Press and hold down the 

CL 

button 

.

 and press the learned

button twice to be erased.

•

CLR 

is displayed for 3 seconds and the mode returns to LEARN

mode.

4.

To return the USE mode, press and hold down the 

OK 

button 

⁄5

until 

USE 

is displayed in the display.

Erasing the code by functions

1.

Press and hold down the  

T.MODE 

⁄1

 and 

MEMO 

¤6

 buttons until

LEARN 

is displayed in the display.

2.

Press and hold down the 

CL 

button 

.

 and press the learned

function button twice to be erased.
•

F-CLR 

and 

LEARN 

are blinking.

3.

Press 

OK 

⁄5

 button to continue erasing.

•

F-CLR 

is displayed for 3 seconds and the mode returns to

LEARN mode.

• To cancel the erasing operation, do not press 

OK 

button 

⁄5

and simply touch any other button.

4.

To return the USE mode, press and hold down the 

OK 

button 

⁄5

until 

USE 

is displayed in the display.

x 2

x 2

5 cm