Marantz SR7012 Owner'S Manual Download

Page: 237 / 370

Bass

Set subwoofer and LFE signal range playback.

Subwoofer Mode

Select low range signals to be reproduced by subwoofer.

LFE

(Default):

The low range signal of the channel set to

“Small” speaker size is added to the LFE

signal output from the subwoofer.

LFE+Main:

The low range signal of all channels is

added to the LFE signal output from the

subwoofer.

“Subwoofer Mode” can be set when “Speaker Config.”

“Subwoofer” in the

menu is set to other than “None”. (

p. 229)

Play music or a movie source and select the mode offering the strongest bass.

If “Speaker Config.”

“Front” and “Center” are set to “Large”, and “Subwoofer

Mode” is set to “LFE”, no sound may be output from the subwoofers,

depending on the input signal or selected sound mode. (

p. 228)

Select “LFE+Main” if you want the bass signals to always be produced from

the subwoofer.

LPF for LFE

Set LFE signal playback range. Set this when you want to change the

playback frequency (low pass filter point) of the subwoofer.

80 Hz

90 Hz

100 Hz

110 Hz

120 Hz

150 Hz

200 Hz

250 Hz

(Default: 120 Hz)

237

Summary of Contents for SR7012


















































































































































































































































































































































































Search results

Summary of Contents for SR7012

Reviews:

Related manuals for SR7012

Brands by name

Popular brands

Marantz SR7012, Owner'S Manual

Search results

Summary of Contents for SR7012

Reviews:

Related manuals for SR7012

Brands by name

Popular brands