• The sound of DVD-Audio which exceeds 96kHz(or
88.2kHz) will be output as 96kHz (or 88.2kHz) even if
DOWN SAMPLING is set to OFF.
When playing disc with copyright protection
• The sound will be down-sampled at 48kHz (or
44.1kHz), even if you set to OFF.
DOLBY DIGITAL (Default: BITSTREAM)
• Set to BITSTREAM when the
player is connected to a Dolby
Digital decoder.
• This function is effective only for
the COAXIAL and OPTICAL con-
nections.
• When HDMI AUDIO is set to
AUTO, this setting is fixed and cannot be changed in
some cases.
BITSTREAM
:
Output by Dolby Digital.
PCM
:
Convert Dolby Digital to PCM.
DTS (Default: BITSTREAM)
• Set to BITSTREAM when the unit
is connected to a DTS decoder.
• This function is effective only for
the COAXIAL and OPTICAL con-
nections.
• When HDMI AUDIO is set to
AUTO, this setting is fixed and
cannot be changed in some cases.
BITSTREAM
:
Output DTS sound.
PCM
:
Convert DTS sound to PCM.
MPEG (Default: PCM)
• Set to BITSTREAM when the unit
is connected to an MPEG
decoder.
• This function is effective only for
the COAXIAL and OPTICAL con-
nections.
• When HDMI AUDIO is set to AUTO, this setting is fixed
and cannot be changed in some cases.
BITSTREAM
:
Output MPEG sound.
PCM
:
Convert MPEG sound to PCM.
NOTE:
• Audio Settings for DOLBY DIGITAL, DTS and MPEG
may be automatically changed to BITSTREAM or PCM
in some cases when using the HDMI connection.
HDMI AUDIO (Default: AUTO)
• Select the number of channels
for the HDMI audio output.
• Refer to the table on page 16 for
the actual output settings.
• Connect appropriate external
equipment for each setting.
• This setting cannot be changed when no equipment
compatible with HDMI audio is connected to the HDMI
OUT terminal.
• Even if an equipment compatible with HDMI audio is
connected, this setting cannot be changed when the
equipment is turned off or the HDMI output mode is set
to hdOFF.
AUTO
: The output channel number is selected automati-
cally from Bitstream, Multi-channel or 2-channel.
Suitable for monitors or amplifiers compatible
with HDMI bitstream.
MULTI PCM:
Multi-channel or 2-channel signals are output
from the HDMI OUT terminal.
Suitable for monitors or amplifiers incompatible
with HDMI bitstream.
QUICK
QUICK
QUICK
– 29 –
EN
English
DVD SETUP
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
HDMI AUDIO
ANALOG AUDIO
ON
ON
BITSTREAM
BITSTREAM
PCM
AUTO
2.0CH
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
HDMI AUDIO
ANALOG AUDIO
ON
ON
BITSTREAM
BITSTREAM
PCM
AUTO
2.0CH
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
HDMI AUDIO
ANALOG AUDIO
ON
ON
BITSTREAM
BITSTREAM
PCM
AUTO
2.0CH
AUDIO
HDMI AUDIO
AUTO
MULTI PCM
2CH PCM
OFF
Speaker Setting for ANALOG AUDIO
When 5.1CH is selected for ANALOG AUDIO, some speaker
settings will be required.
•
During the HDMI output mode, any of the Speaker Setting
is ineffective.
Press the
Cursor
buttons (
K
or
L
) to select
5.1CH, then press the
ENTER
button.
Press the
Cursor
buttons (
K
or
L
) to select the below items,
then press the
ENTER
button.
SPEAKER SIZE
• Press the
Cursor
buttons (
K
or
L
)
to select the speaker to set.
• Press
ENTER
until the desired
speaker size appears.
FRONT(L/R), CENTER, SURROUND(L/R)
(Default: LARGE)
LARGE:
Select this when the connected speaker is
capable of playing back sounds of 100Hz or
less.
SMALL:
Select this when the connected speaker is not
capable of playing back sounds of 100Hz or
less.
OFF:
Select this when it is not connected. (It cannot
be set OFF on the FRONT speaker.)
SUB WOOFER (Default: ON)
ON:
Select this when SUB WOOFER is connected.
OFF:
Select this when it is not connected.
NOTES:
• OFF is not available for SUB WOOFER when SMALL is
selected for FRONT(L/R).
• SMALL is not available for FRONT(L/R) when OFF is
selected for SUB WOOFER.
• During DVD-Audio playback, the sound may not come
out as setting due to restrictions in the disc or the play-
er.
• During DVD-Audio playback, the Low Pass Filter (which
filters out the sound with the sound wave frequency
over 100Hz) of the SUB WOOFER will be turned off
with the following speaker setting. Otherwise, the Low
Pass Filter will be turned on.
FRONT(L/R): LARGE
CENTER: LARGE
SUB WOOFER: ON
SURROUND(L/R): LARGE
2
1
AUDIO
SPEAKER SIZE
DELAY TIME
BALANCE
5.1CH
AUDIO
FRONT (L/R)
CENTER
SUB WOOFER
SURROUND (L/R)
SPEAKER SIZE
LARGE
LARGE
ON
LARGE
2CH PCM:
2 channel signals are output from the HDMI OUT
terminal.
Suitable for monitors or projectors compatible
with HDMI 2CH.
OFF:
No audio signals are output from the HDMI OUT
terminal.
To use the 5.1CH AUDIO OUT jacks.
ANALOG AUDIO (Default: 2.0CH)
• This setting may not be
changed depending on the
HDMI connection. Set HDMI
AUDIO to OFF if it occurs.
2.0CH:
Output 2ch sound from
the 5.1CH AUDIO OUT
jacks.
5.1CH:
Output multi channel sound from the 5.1CH
AUDIO OUT jacks.
Press the
SETUP
button to exit.
5
AUDIO
ON
ON
BITSTREAM
BITSTREAM
PCM
AUTO
2.0CH
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
MPEG
HDMI AUDIO
ANALOG AUDIO
E61M7ED/E61M9ED(EN).qx3 05.8.4 5:27 PM Page 29
