67
Specifications
n
Performance
Signal format :
NTSC, PAL
Applicable discs /memory device :
(1) BD-Video disc :
12 cm, 1 side, 1 layer; 12 cm, 1 side, 2 layers
(2) DVD-Video / DVD-Audio disc :
12 cm, 1 side, 1 layer; 12 cm, 1 side, 2 layers /
12 cm, 2 sides, 2 layers (1 side, 1 layer)
8 cm, 1 side, 1 layer; 8 cm, 1 side, 2 layers /
8 cm, 2 sides, 2 layers (1 side, 1 layer)
(3) Super Audio CD :
12 cm, 1 layer / 12 cm, 2 layer / 12 cm, Hybrid
(4) Compact Disc (CD-DA) :
12 cm / 8 cm disc
(5) Memory device :
USB memory device (USB 2.0)
HDMI output :
Output terminal : 19-pin HDMI terminals, 2 set
(Deep Colour, Dolby Digital Plus, Dolby TrueHD, DTS-HD, 3D)
Analog audio output :
2 channels output terminal : Pin jack, 1 set
Output level : 2 Vrms (10 kΩ)
2 channels output terminal : Balanced terminal, 1 set
Output level : 4 Vrms (10 kΩ)
Audio output characteristics :
(1) Frequency response
q
BD (Linear PCM)
w
DVD (Linear PCM)
e
Super Audio CD
r
CD
: 2 Hz - 22 kHz (48 kHz sampling)
: 2 Hz - 44 kHz (96 kHz sampling)
: 2 Hz - 88 kHz (192 kHz sampling)
: 2 Hz - 22 kHz (48 kHz sampling)
: 2 Hz - 44 kHz (96 kHz sampling)
: 2 Hz - 88 kHz (192 kHz sampling)
: 2 Hz - 40 kHz
: 2 Hz - 20 kHz
(2) S/N ratio : 125 dB (BD)
(3) Total harmonic distortion : 1 kHz, 0.0008 % (BD)
(4) Dynamic range : 110 dB (BD)
Digital audio output :
Coaxial digital output : Pin jack, 1 set
n
General
Power supply :
AC 120 V, 60 Hz
Power consumption :
(
25 W
0.3 W (Energy Saving Standby)
0.5 W (Normal Standby)
14 W (Quick Start)
z
For purposes of improvement, specifications and design are subject to change without notice.
G
Remote control unit
H
Symptom
Cause/Solution
Page
The set cannot be
operated with the
remote control.
• Aim the remote control directly at the infrared sensor window on
the front of the unit.
• Operate within a distance of 7 m from the remote control sensor.
• Remove any obstacles.
• Replace the batteries with new ones.
• Insert the batteries in the proper direction, checking the
q
and
w
marks.
• Match the signal code of the remote control to the signal code of
the unit.
• Check whether the remote sensor of the unit is exposed to direct
sunlight or strong light of a fluorescent lamp, 3D synchro signal of
TV. Be sure to avoid exposing the remote sensor to strong light.
• The switch on the back of the
REMOTE CONTROL
is on “EXT.
(EXTERNAL)”. When using this unit independently, set the switch
to “INT. (INTERNAL)”.
• Some functions may not be used under certain operating conditions, but this is not failure of the unit.
Read the description in this Owner’s Manual for details on correct operations.
• The volume may differ from disc to disc. This is due to the differences in how the signals are recorded
on the disc and is not a malfunction.
• During programmed playback, it is not possible to perform random playback or to start playback from a
desired track or file.
• Some functions are prohibited on some discs.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Inf
or
mation
DVD