52
Remote control unit
Remote control settings
(remote control side)
Switches when this unit remote control operates another
marantz BD players in the vicinity.
Set the remote control code simultaneously on the unit, too
(
G
Remote control code setting
H
• The supplied remote control has two remote control code settings:
BD 1 and BD 2.
• The code is set to “BD 1” at the factory.
• To set the code to “BD 2”, hold the
2
and
2
pressed for more than
five seconds.
• To set (return) the code to “BD 1”, hold the
2
and
1
pressed for
more than five seconds.
If the signal code of the remote control does not match the signal
code of the unit, the remote control code set on the unit is shown on
the display.
G
Example
H
If the code setting on the unit is “BD1”, and the setting on the remote
control is “BD2”, “BD1” is shown on the display.
NOTE
Match the signal code of the remote control with the signal code of
the unit. If the remote control code is different, you cannot operate the
this unit with the remote control.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Inf
or
mation
DVD
