T
roubleshooting
Information
HDMI Control F
unction
Playback
Setup
Getting Started
Specications
16
ENGLISH
Audio signal from the HDMI output terminal
n
You can change the audio format and playback number of channels according to the specications of
the device to which the UD9004’s HDMI audio output signals are input. Make settings while checking
the specications of the audio device to be connected as well as the audio format/number of channels
stored in media and les for playback.
Media/Files
Audio format
Setting “HDMI Setup” – “Audio Setup” (
v
page 25) on
the GUI menu
Auto
Multi LPCM
BM On/Off
2ch
BD
Dolby Digital
Dolby Digital
z
1
Multi LPCM
2 ch Downmix
LPCM
Dolby Digital Plus
Dolby Digital Plus
z
1
Dolby TrueHD
Dolby TrueHD
z
1
DTS
DTS
z
1
DTS-HD
DTS-HD
z
1
LPCM
Multi LPCM
AVCHD
Dolby Digital
Dolby Digital
Multi LPCM
2 ch Downmix
LPCM
LPCM
Multi LPCM
DVD-Video
Dolby Digital
Dolby Digital
DTS
DTS
LPCM, MPEG
2 ch LPCM
DVD-Audio
LPCM, PPCM
Multi LPCM
2 ch Downmix
LPCM
Super audio CD
z
2
Multi area
Stereo area
2 ch LPCM
CD layer
DivX
®
Dolby Digital
Dolby Digital
Multi LPCM
2 ch Downmix
LPCM
MP3, MP2
2 ch LPCM
CD, MP3, WMA, AAC, LPCM
DTS-CD
DTS
Multi LPCM
2 ch Downmix
LPCM
z
1 : Multi LPCM signals are output when “BD Audio Mode” is set to “Mix Audio Output ” (
v
page 33).
Multi LPCM signals are output when outputting HDMI video signals with resolutions of 480i/576i or
480p/576p.
z
2 : Super Audio CD audio signals are output at 44.1 kHz 16-bit.
Even if “HDMI Setup” – “Audio Setup” on the GUI menu is set to “Auto” (
v
page 25), multilinear PCM
or downmixed 2-channel linear PCM signals are output if a device that does not support bitstreams is
connected.
Copyright protection system
In order to play back digital video and audio such as BD-Video or DVD-Video via HDMI connection,
both the player and TV or the AV Amp need to support the copyright protection system known as
HDCP (High-bandwidth Digital Content Protection System). HDCP is copyright protection technology
comprised of data encryption and authentication of the connected AV device. The UD9004 supports
HDCP.
NOTE
If a device that does not support HDCP is connected, video and audio are not output correctly. Read the
•
owner’s manual of your television or AV Amp for more information.
The audio signal from the HDMI output terminal (sampling frequency, number of channels, etc.) may
•
be limited by the HDMI audio specications of the connected device regarding permissible inputs. For
example, if the HDMI audio specication of the connected device is 5.1 channels, 5.1-channel audio
will be automatically output even when playing back 7.1 channels by the UD9004. In this case, analog
audio output will also be 5.1-channel.
Audio signal input may not be supported depending on the HDMI compatible monitor (projector, etc.)
•
being used.
When the UD9004 is connected to this kind of device, audio signals are not output from the HDMI
terminal.
1. Home Theater Playback – Playing Back Using Multi-channel System –
Connections
