You can adjust picture quality to your liking in each of the picture modes and save those adjustments in memory.
This projector makes 3 memory indexes (1, 2 and 3) available for each picture mode.
❖
For a video signal input, the following adjustments can be made.
Note:
• Some menu items cannot be adjusted depending on the input signal.
• If default is selected as the index, picture quality cannot be adjusted. To adjust picture quality, select an index from 1 to 3.
See “Preset” (
☞
pg. 34)
❖
Contrast
❖
Color Temp. (Color Temperature)
1 :
Red comes out strong. Color temperature is about 5250 K.
2 :
Red is mildly strong. Color temperature is about 5800 K.
3 :
Normal. Color temperature is about 6500 K.
4 :
Blue is mildly strong. Color temperature is about 7500 K.
5 :
Blue comes out strong. Color temperature is about 9300 K.
❖
Adjusting Picture Quality
1.
Select the desired menu item and press the
2
button. An adjustment bar appears on the screen.
2.
Use the
1
and
2
buttons to adjust the item.
3.
Press the
3
button to enter the setting and return to menu item selection.
INPUT
ASPECT
MENU
V-MUTE
ENTER
3.
1, 2
INPUT
PATTERN
ENTER
3.
1, 2
Color Temp.
2
Contrrast
50
Picture Adjust
Menu
Standard 1
Setting
Display
System
Config
Trigger 2
Preset
Contrast
Brightness
Color
Sharpness
Tint
Noise Reduction
Color Temp.
Fine Menu
50
44
58
7
0
0
3
Picture Adjust
26
ENGLISH
Menu item
Contrast
Brightness
Color
Sharpness
Tint
Noise Reduction
Color Temp. (Color Temperature)
Adjustment range
0
100
Weak
Strong
0
100
Dark
Bright
0
100
Light
Deep
0
31
Soft
Sharp
R50
G50
Purple
Green
0
63
Weak
Strong
1
2
3
4
5
Red
Blue
Downloaded From projector-manual.com Marantz Manuals
