50
System Time
This page is to set the card’s system time. Then, the card can synchronize with an
external or internal Time Server.
System Time (yyyy/mm/dd hh:mm:ss)
Sets the card’s current system time/date, click on Adjust Now to automatically adjust to
the correct time/date.
Time Between Automatic Updates
To set an interval for time synchronization.
Time Server
The timeserver can be selected from the drop-down list or by adding it manually.
Recommended: time.windows.com or time.nist.gov
Time Zone (Relative to GMT)
Use the drop-down list to select its GMT zone
Using Daylight Saving Time
Select whether to use the daylight-saving time system to adjust the clock for 1 hour.
Rebooting the Card
Go to Configuration/System Time
“Restart” Reboots the SNMP card ONLY, not the UPS.
Auto Restart System for Every (0 is disabled)
The card to restart automatically at a preset hour or minute
Manual Restart System After 30 seconds
Once click on Apply, The card restarts after 30 seconds.
