TI080001 OPERATING INSTRUCTIONS
1. TO SET CLOCK
Slide switch to “clock”. Depress “HR”, “MIN”
or “SEC” to actual time. Press “CLEAR”
button for 3 seconds to change 12 hours AM/
PM format to 24 hours international time
format or vice versa.
2. TO SET TIMER
Slide switch to “TIMER” press “HR”, “MIN” or
“SEC” for desired time. Press “START” – To
temporarily stop timing cycle. Press “STOP”
to restart. Press “START”. The timer will count
up from 0:00:00 to tell you how long since
the alarm sounded. To stop count up and / or
alarm. Press “STOP”.
3. MEMORY
Depress “HR”, “MIN” or “SEC” then press
“MEMORY” to enter preset time (“MEMORY”
flag on display on) Press “MEMORY” to recall
preset time and then press “CLEAR” to cancel
preset time.
4. COUNT UP
Slide switch to “COUNT-UP” position and
press “START” to start counting upward. Press
“STOP” to temporarily stop timing/ to reset,
press “START”. Press “CLEAR” to reset digits
to 00HR:00MIN:00SEC.
Use 1.5V “AA” battery
EN
