5.
7.
6.
9.
10.
Alternator
Adjustment
Bushing
8.
Fig. 5. Install the Main Faceplate (21266-A or 21241-A)
onto the studs using (4)
3
⁄
8
x 1" SHCS (S248).
Fig. 6. Install the Ajustment Bushing (S450) into the
rear Alt Support.
Fig. 7. Install the Power Steering Adapter Bracket
(21074-A) to the power steering Pump using (2)
3
⁄
8
x
3
⁄
4
"
SHCS (S244) and (1)
3
⁄
8
x 1" Button Head Bolt (S309) .
Fig. 8. Install the power steering pump (P304 or P9600)
to the main bracket (21266-A or 21241-A) by stacking
the two Spacers
3
⁄
8
x 1.680 (TP3-1.680) and
3
⁄
8
x 1.890
(TP3-1.890) together between the pump adapter (21074-
A) and the rear support bracket (21262-A) using a
3
⁄
8
x 4
3
⁄
4
" SHCS (S277) to install the pump. If additional length
is needed use supplied washers.
Fig. 9. Install the Alternator (P555) or (P9655) using
a
3
⁄
8
x 5
1
⁄
4
" SHCS (S279) and a
3
⁄
8
" lock nut (S622).
Place a Billet Spacer Bushing (TP3-1.400) between the
Alternator and the Adjust Set Screw (S450). Adjust
S450 to take up any space between the lower alternator
support and the spacer. (snug only at this time). Tighten
lightly at this time.
Fig. 10. In the upper Alternator and Power Steering slots
use the two (MM100) Alum. Bolt bushings and the (2)
5
⁄
16
x 1" (S146)
3
⁄
8
x
3
⁄
4
"
SHCS
3
⁄
8
x 1"
Button
Heat Bolt
