background image

 

 

 

 

Marco Beverage Systems Ltd. 

 

 

 

INSTRUCTIONS FOR MODELS 

 
 
 
 

 

OCEANIC 8.4kW 

 (P/N: 1000179D)  

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Water  pressure

 

:

 5 - 50 psi (min.-max.)35 - 345 kPa (min.-max.) 

 

 

 
 

 
 
 

Marco Beverage Systems Limited. 

63d  Heather Road, 
Sandyford Industrial Estate, 
Dublin 18. 

Marco Beverage Systems Limited. 

Shire House, Strixton Manor,  
Strixton, Wellingborough, Northants, 
NN29 7PA  

Ireland Tel: +353 (0)1 295 2674  
Ireland Fax: +353 (0)1 295 3715 
email: sales@marco.ie 
www.marco.ie 

UK Tel: +44 (0)2072 744 577  
UK Fax: +44 (0)2079 788 141 
email: sales@marco-bev.co.uk 
www.marco-bev.co.uk

 

Summary of Contents for OCEANIC 8.4kW

Page 1: ...Limited 63d Heather Road Sandyford Industrial Estate Dublin 18 Marco Beverage Systems Limited Shire House Strixton Manor Strixton Wellingborough Northants NN29 7PA Ireland Tel 353 0 1 295 2674 Ireland Fax 353 0 1 295 3715 email sales marco ie www marco ie UK Tel 44 0 2072 744 577 UK Fax 44 0 2079 788 141 email sales marco bev co uk www marco bev co uk ...

Page 2: ...eral gallons through Connect right angled tailpiece of the hose to the inlet valve of the boiler again 3 4 BSP Make sure the sealing washer is fitted here also Turn on water and check for leaks Connect to a suitable power supply Font Installation Counter Drilling Holes need to be drilled in the counter for the mounting bolts 6 10mm diameter 4 holes are in the base plate Please use the dimensions s...

Page 3: ...pense time for less quick font button click will set the font back into push hold mode After the volumes are set properly press the tactile button on the timer board once again Both pumps will turn on and off for 0 1s twice that will be heard as a double click meaning that the timer is out of calibration 3 Please note that there is no given order which font is to be calibrated first in fact they m...

Page 4: ...water boiler manufacturers service calls resulting from limescale are not covered by warranty Fitting a scale reducer is recommended especially in hard water areas This can reduce the build up of scale but may not stop it altogether The frequency that descaling is required depends on the local water supply hard water areas need more attention A scale reducer can reduce the build up of scaling but ...

Reviews: