3
Intended use
This product is intended exclusively for drilling holes in wood, plastic, concrete, bricks and stone
Improper use
all applications of the drill that are not listed in the "Intended use" chapter are classed as improper
use.
The drill must not be used for the following purposes:
- To mix paint or building materials
- To polish, grind, sharpen or engrave with corresponding attachments
- To drive other devices
There is a risk of injury.
The user of the hammer drill is liable for any and all material and personal damage caused by
improper use.
Using other or non-original parts with the drill will void the manufacturer warranty.
Never use the hammer drill as a screwdriver.
Residual risks
Even when the drill is used properly, there is still a certain residual risk which cannot be ruled out.
Due to the nature and design of the drill, the following potential risks may occur:
- Contact with the rotating chuck (crushing type injuries)
- Reaching into the area of the rotating drill bit (cutting type injuries)
- Contact with the sharp edges of the holes drilled and drilling chips (cutting type injuries)
- Hearing loss if the stipulated ear protectors are not worn
- Inhalation of particles given off during drilling
- Electric shock when touching non-insulated electrical components.
If the operating instructions are not observed, other residual risks may occur due to
improper use.
955.1920.246 DDM1 Drilling Machine Manual Multi Language_Layout 1 06/12/2012 10:26 Page 3
