0
ITA
0
ENG
PWR
MENU
AM/FM
ASQ
SCAN
MEM
EMG
MSCAN
MSAVE
LO/CT
SHIFT
MIC Gain Control
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
PWR
MENU
AM/FM
ASQ
SCAN
MEM
EMG
MSCAN
MSAVE
LO/CT
SHIFT
MIC Gain Control
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
PWR
MENU
AM/FM
ASQ
SCAN
MEM
EMG
MSCAN
MSAVE
LO/CT
SHIFT
MIC Gain Control
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
PWR
MENU
AM/FM
ASQ
SCAN
MEM
EMG
MSCAN
MSAVE
LO/CT
SHIFT
MIC Gain Control
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
PWR
MENU
AM/FM
ASQ
SCAN
MEM
EMG
MSCAN
MSAVE
LO/CT
SHIFT
MIC Gain Control
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
AM/FM
ASQ
SCAN
MEM
EMG
Mic gain control
It adjust to the loudness of your voice. Generally, the volume position is maximum counter clockwise.
Hold the mic 7 - 10 cm from your mouth for the good quality.
AM/FM
You can select am or fm modulation by pressing the am/fm button.
SCAn
Your trucker incorporates a scanning feature. The trucker will scan through all 40 channels and
Will stop at busy channel. It will stay on that channel until seven seconds after conversation
Has ceased and then it will resume scanning.
To active this feature turn on the power and adjust the volume.
Adjust “SQ”. Press the scan button to start scanning. The word SC will appear in the LCD
Display and the unit will start scanning.
If you want to stop scanning you can push the scan button again or press the push to talk switch.
This will shut off the scanning function and transmit on that channel.
EMG
The emg (emergency) button for instant access to national emergency channel 19, which is
Monitored by police and various safety groups.
MEM
To access channel in the memory button simply press the “mem” button and choose the
Desired memory channel from m1 to m5.
ASQ
The ASQ is a feature that allows the radio to keep the receiving mode without white noise and
To receive the incoming signal stronger than fixed level. It is level located 3db below
Maximum usable sensitivity.
Normal squelch control system was RF level controlled but the ASQ controlled system is with noise
filter amplifier. So, more actually controlled of squelch system in the many unless noise condition.
