background image

www.marcumtech.com

- 12 -

Two-Year Warranty

Versa Electronics warrants this product to be free from defects in materials 
and workmanship for two years from the date of purchase. This warranty 
applies to customers who properly fill out and return the warranty card 
included with this manual. Failure to complete and return the warranty card 
voids the warranty. Versa Electronics will, at its sole discretion and without 
charging the customer, repair or replace any components that fail in normal 
use. Failures due to abuse, misuse, or unauthorized alteration, modification 
or repair are not covered. The warranty is valid only for the original owner 
who purchases the unit from an authorized dealer. Products purchased from 
on-line auction sites are not considered under warranty.

How to Obtain Service

We want our products to provide you with a pleasant on-the-water experi-
ence. That means maximum customer satisfaction. If you have a problem with 
your unit please contact Versa Electronics toll free number at (888) 778-1208 
for a Return Authorization Number (RA#) or e-mail us at service@versae.com. 
No service returns will be accepted without this return authorization number, 
which must be clearly marked on the outside of the package. Versa Electron-
ics retains the exclusive right to repair or replace the unit at its discretion. 

The customer is responsible for shipping costs associated with returning the 
unit to Versa Electronics. Versa Electronics will pay for shipping the repaired 
unit back to the customer while it is still under warranty. All out of warranty 
services will be charged a fee for service and shipping which must be paid  
in advance. After obtaining a Return Authorization number, the unit should  
be securely packed and shipped “pre-paid freight” and insured to Versa 
Electronics. It is the consumers’ full responsibility to track their products sent 
out in the mail or other forms of delivery service. Versa Electronics will not 
be liable for lost packages sent out in the mail. Unless specified otherwise, 
do not include batteries or other accessories when returning the product for 
repair. Versa Electronics will not be responsible for lost or damaged accesso-
ries. Please allow a minimum of 10 business days to complete your repair. 

Summary of Contents for LX-3TC

















Reviews: