background image

Versa Electronics 

www.marcumtech.com 

DYNAMIC 

– This Marcum exclusive feature functions similarly to the “Auto Range”, 

but fine tunes your range setting even farther.  The Dynamic Depth will maximize 

the space on your display by utilizing a variable range that will always be just slightly 

deeper than the actual depth. For example, if you were fishing in 23 feet of water, 

the Dynamic Depth feature will automatically create a custom range of 0 - 25 feet. 

Similarly, if you were in 29 feet of water, the Dynamic Depth range will be 32 feet. 

The Dynamic Depth range will not go shallower than 10 feet. 

MANUAL DYNAMIC 

– This functions similarly to the DYNAMIC DEPTH, but allows 

the user to select the depth range.  For instance, say you start out in AUTO range 

and you quickly learn that the water is 21 feet deep.  The AUTO range will have 

selected the 0-40 foot range.  To fine tune your display, press the RANGE 

button, and highlight MANUAL DYNAMIC.  Now start pressing the UP/DOWN 

buttons to get to the desired DYNAMIC DEPTH range.  If the water is 21 feet 

deep, you would select 22 feet.  Now the DYNAMIC DEPTH has created a 0 – 22 

foot range, utilizing virtually 100% of your display. 

We offer the manual range functions because in some circumstances the AUTO 

range functions can behave erratically. In situations where there is heavy 

weedgrowth, uneven bottom contours, or very shallow water, it is suggested that 

the user manually selects a fixed depth range. 

ZOOM 

– The ZOOM button allows you to select the upper range of the portion of 

the  water  column  you  would  like to zoom in on.  The  actual  size of the  Zoom 

window can be adjusted in the Main Menu. 

The Zoom feature allows you to focus the display on a specific depth within the water 

column, and can be a great benefit in a variety of fishing situations. See the separate 

ZOOM section below for more info on the ZOOM. Whenever you are utilizing the 

ZOOM menu, keep in mind that it “times-out” after 6 seconds. 

IR (INTERFERENCE REJECTION) 

– The Interference Rejection system is 

designed to suppress competing return signals from other sonar units being used 

within close proximity. When other sonar units are causing interference to the 

display of the Digital Sonar, activate the IR feature by depressing the IR button 

located on the control panel of the Digital Sonar.  Interference is indicated by 

unusual signals flashing or scrolling across your display. 

There are 12 levels, or channels, of interference rejection. Press the IR button 

once to open the IR window, now use the UP/DOWN buttons to select the 

desired level of IR. The correct level of IR will be achieved when the display is 

clear of display clutter. In some extreme cases, clutter will be greatly reduced but 

not totally eliminated. 

Anytime two or more sonars are being operated in proximity to each other, 

there is the potential for interference. Deep water and hard bottom will increase 

the likelihood that one or more of the competing sonars will experience 

interference. Besides experimenting with different levels of IR, the anglers 

experiencing interference can also try having their transducers set at 

different levels, going to narrow cone angles, and reducing gain or 

sensitivity settings. 

Summary of Contents for LX-6s





















Reviews: