COLOR PALETTE
Use this feature to choose which of the 4 color palettes you prefer. Option 1,
Option 2, Option 3, Option 4
The default setting has RED as representing the strongest signal, often signifying a hard bottom
or a larger fish that is in the center of the transmit signal (cone). GREEN represents a softer
bottom or smaller fish in the middle of the transmit signal or a larger fish on the outside of the
transmit signal. YELLOW represents weaker signals and often signifies weeds, small bait-fish,
medium-sized fish on the outside of the transmit signal. When using the other color palettes, the
colors displayed and the signal strengths represented will change accordingly. One important
note, the 6–color and Gray Scale palettes will often give more detail than the three color options
due to the fact that these palettes have three more colors or shades to “paint” with.
GAUGES
—A feature unique to all MarCum Digital Sonars is the ability to be able to constantly
see where your most critical settings are at.
At a glance, you will be able to tell what your
Sensitivity is at, what level of IR you are operating at, how high your Target Adjust is, your
range, and battery status displayed in volts. If you have the camera operating, you will also see
camera depth and temperature. The gauges can be turned on or off by pressing MENU,
highlighting “Gauge Display”, and making your selection. Where the gauges display will depend
on which screen configuration you have selected. Gauges cannot be displayed if you are only
operating one or both of the scrolling graphs.
One of the most critical gauges is the BATTERY METER—This gauge indicates the voltage
currently being produced by your battery. The LX-9 needs between 11 and 13 volts to properly
operate. If the voltage drops below 11 volts, you may see a decrease in performance.
Recharging your battery after each use will maximize the life of your battery, and will ensure that
your LX-9 will run strong all day.
-13-
Versa Electronics
www.marcumtech.com