Versa Electronics
www.marcumtech.com
- 7 -
increase the TARGET ADJUST. This feature should be used in conjunction
with the SENS to fine-tune your display. Anglers who have a hard time seeing,
as well as those who fish from a standing position will really appreciate the
“TARGET ADJUST” feature.
BATTERY METER—This gauge indicates the voltage currently being
produced by your battery. The LX-7 needs between 11 and 13 volts to prop-
erly operate. If the voltage drops below 11 volts, you may see a decrease in
performance. Recharging your battery after each use will maximize the life of
your battery, and will ensure that your LX-7 will run strong all day.
MENU/ENTER— This button enables you to access other functions of the
LX-7. Some of these functions are also accessible through the use of the
other buttons on the Control Panel. When you press the MENU button, three
sub-menus will be revealed—SONAR SETTINGS, DISPLAY OPTIONS, and
SYSTEM SETTINGS.
Use the arrow buttons to highlight the desired sub-menu, and press MENU
again to access to the sub-menu.
SONAR SETTINGS is the first sub-menu, and it has the following features
that may be adjusted:
SENSITIVITY
This adjusts the sensitivity. This is described in the Control
Panel section above
RANGE
Select range in the same manner as described above
ZOOM DEPTH
Here is where you set the upper range of the zoom window.
This can also be done by using the ZOOM button as
described above. The actual size of the zoom window is
adjusted in the “Zoom Window” field.
ZOOM WINDOW Here is where you determine the size of the Zoom Window.
Go to the “Zoom” section of the manual for more specific
information.
IR
Interference Rejection can be adjusted here, as well as by
using the Control Panel button. See above for more info.
TARGET
ADJUST
Target Adjust can be adjusted here, as well as by using the
Control Panel button. See above for more info.
CONE ANGLE
Cone Angle [and Sonar Footprint] can be adjusted here, as
well as by using the Control Panel button. See above for
more info.
SONAR MODE
Choose between “ice fishing” and “open water” mode here
MAX PING RATE
Adjusting this setting will increase the response time of
signals from your transducer to the screen. If fishing shallow
water (less than 20 feet) use the lower settings. Likewise,
you will see better performance with the higher settings in
deeper water.
