ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended two or more people assembling this
machine to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Connect the two Upright Beams (#1) by a Cross Brace (#4) in the mid-span. Align the
holes and secure each end of Cross Brace to the Upright Beam with two M10 x 4 ¾”
Carriage Bolts (#33), one Bent Bracket (#14), two
∅
¾” Washers (#2), and two M10
Aircraft Nuts (#13).
B.) Insert two Crutches (#6) into the top openings on the Upright Beams. Secure them with
two Lock Knobs (#26) through selected holes to obtain desired height of the Supports.
C.) Attach one Weight Post (#11) to each Upright Beam. Secure each Weight Post with
one M10 x 1” Allen Bolt (#36) and
∅
¾” Washer (#2). Attach one Olympic Sleeve (#25)
to each Post.
DIAGRAM 1
6
Summary of Contents for CLASSIC MCB-5702
Page 4: ...WARNING LABEL 3 HARDWARE PACK...
Page 11: ...10...
