STEP 3 (See Diagram 3)
A.) Attach the Seat Bracket (#42) to the pivot on the Main Seat Support (#3). Attach the
Backrest Incline Support (#10) in between the two side-holes on the Backrest Supports
(#12). Align the Backrest Supports (#12) to the Seat Bracket. Secure them together
with one M12 x 6 ¾” Hex Bolt (#40), two
∅
1” Washers (#41), and one M12 Aircraft Nut
(#7).
B.) Place the Backrest Board (#17) onto the Backrest Supports (#12). Secure it with four
M8 x 1 5/8” Allen Bolts (#38) and Ø 5/8” Washers (#5).
C.) Place the Seat (#18) onto the Seat Bracket. Secure it with four M8 x 5/8” Allen Bolts
(#46) and
∅
5/8” Washers (#5).
D.) Use the L-shaped Pin (#48) through the selected holes on the Seat Bracket to hold the
Seat at desired height.
DIAGRAM 3
8
Summary of Contents for CLASSIC MCB-5702
Page 4: ...WARNING LABEL 3 HARDWARE PACK...
Page 11: ...10...
