Mareli Systems PS 24, Assembly And Exploitation Manual

11

Mareli Systems

CHRONO

This Manu allows selecting the programming modalities and and the Ignition/Extinguishing time slots.

Disable

Daily

Weekly

Week

-

End

Modality

 - It allows selecting the disired modality, or disable all set programming.

1. Enter modification mode through the key 

P3

.

2. Select the chosen modality (Daily, Weekly or Week end).

3. Enable/disable chrono modality through the keys 

P2

.

4. Save the settings through the keys 

P3

.

Programming

The system includes three type of programming: Daily, Weekly, Week end. 

After selecting the desired kind of programming:

1. Select the programming time through the keys 

P4/P6

.

2. Enterthe adjustment modality (selected time will be flashing) through the keys 

P3

.

3. Change the time via keys  

P4/P6

.

4. Save the programmong with the keys 

P3

.

5. Enable (a “V” is displayed) or disable the time slot (a “V” is not displayed”) by 

pressing the keys 

P5

.

Daily

Select the day of the week to program and set the ignition and extinguishing times.

Programs around midnight

Set the clock On of the previous day at the desired time: Ex. 20.30

Set the clock of OFF of the previous day at:  23:59

Set the clock On of the following day at  00:00

Set the clock of OFF of the following day at the desired time: Ex. 6:30

The system turns on at 20.30 on Tuesday and turns off at 6.30 on Wednesday

Weekly

The programs are the same for all days of the week.

Week-end

Choose between 'Monday-Friday' and 'Saturday-Sunday' and then set the switching 

on and off times.

Monday 

    ON             OFF 

  09:30           11:15  V 

  00:00           00:00 

  00:00           00:00 

Monday

____________ 

Tuesday 

Wednesday  

Thrusday 

Friday

Mon-Fri 

Sat-Sun 

USER MENU 2

Menu is accessed by pressing the 

P3 

buttons for 3 seconds .

Keyboard Settings

Time and Date

 - Used to set the day, month, year and current time.

Language

 - Menu to modify the language of the LCD board.

Keyboard Menu
Set Contrast

 - Menu used to regulate the display contrast.

Set Minimum Light

 - Menu used to regulate the lighting of the display when the command aren’t used.

Keyboard Address - 

It allows to change the address of the RS485 node. In the RS485 bus it is not possible to 

have more nodes with the same address. It is possible to configure the keyboard as local or remote by changing 

the address (16 for local , 17 for remote).

Node List - 

This menu shows: communication address of the board, typology of the board, firmware code and 

firmware version. Data are not modifiable. The typologies of board that can appear are:

MSTR - Master; 

INP - Input ;  

KEYB - Keyboard; 

OUT - Output;

CMPS - Composite;  SENS - Sensor; 

COM - Communication;

Acoustic Alarm 

- It allows to enable or disable the acoustic alarm of the keyboard.