2
TANKOPTIX FLEX - REV 1.2
Display Unit (MFS20-D)
Functions
The system will be configured for low-power operation. The display will only power on
through user input. Alternatively, the system can be set for 24/7 mode, in which the display is
always active.
Display Text
REFRESH BUTTON
Low-Power Mode
Pressing the refresh button will power the
system on and display a reading for 30
seconds.
If TankOptix Cloud reporting is enabled
the system will register the input, and
report the readings to the cloud.
Additional presses will cycle through the
connected sensors (if multiple sensors are
connected) and/or extend the system
power-on time by 30 seconds.
24/7 Mode
If multiple sensors are connected, pressing the refresh button will cycle through the
connected sensors.
If TankOptix Cloud reporting is enabled, pressing and holding the refresh button for >1
sec will register the input, and report the readings to the cloud.
Level Reading
The level reading
indicates the tank’s
current total volume.
Tank Identifier
Displays the currently-
selected tank/sensor.
Interface Reading
An interface reading
will only be displayed
in the event that the
system is enabled to
measure an interface.
