·
Mechanical Detent Provides Tactile and Audible Switch Operation
·
Configurable Operation and Appearance Aspect
·
Accepts Aftermarket Switch Actuators
·
All Switch Positions have Blue LED's
·
Horizontal or Vertical Mounting Options
·
Screwless, Snap-In Mounting
·
IP68 Rated with Plug for Unused Connector
·
NMEA 2000 LEN: 3 (Max Current 150mA)
·
Optical Interrupt Switches Endurance Tested to Reach Minimum of 250,000 Operations
To learn more about the MPower
®
VMM6's features please refer to the User's Manual located on
the Blue USB Disc.
See launch instruction below to access USB Disc Menu.
Thank you for purchasing MPower VMM6
The VMM6 features 6 of Carling's Contura® rocker switches available in different styles. The VMM6
requires only a connection to an NMEA 2000® network to begin.
Configure the VMM6 using Maretron
N2KAnalyzer® installed on a PC and an IPG100 or USB100 connected to the NMEA 2000® Network.
VMM6
transmits and receives NMEA 2000® PGN 127501. Each transmission of PGN 127501 reports
the state
of all VMM6 switch positions every 15 seconds and each time a switch is pressed. Each VMM6
switch has
two embedded LEDs that can be configured as a backlight or to show the state of an MPower
load
controller ECB (Electronic Circuit Breaker) reported in a received 127501 PGN. Assigning VMM6
control
of an ECB or multiple ECBs is configured within the MPower load controller(s) configuration while
assigning VMM6's LEDs operation is configured within the VMM6 unit's configuration.
VMM6
Features at a Glance:
P/N: M0031
40
40
9
Rev. 1.
2
2
Page
1
1
