INSTRUCTIONS AND WARNINGS
FOR INFRARED HEATING PANELS
MAREX Solutions
application, various models are recommended (to find the best model for you, please contact
us or
your dealer). For all models, and applications be sure to follow the safety instructions for
installation (see below point 3.1).
MAREX IR
HEATING panels heat up in just a few minutes (about 5 to 10 minutes, see point 2). If you
not have a pleasant warm climate area immediately, you have to run the heating element for an
extended period for the first time, because the cold objects (furniture, walls, ceilings, floors, etc.)
need to warm up. Once these solids are heated, the warmth will be spread throughout the room
and you will be able to reduce the duration of the heating element to a minimum. Hence an
enormous contribution to environmental protection will be provided.
Depending on which
MAREX IR
HEATING panel heater model you have selected, the surface will heat
from 80 to 125 °C. All
MAREX
IR
HEATING panel heaters are equipped with temperature sensors that
regulate the surface of the unit before overheating.
MAREX IR
HEATING panel heaters can be found in different environments application. Further details,
see section 1.3.).
1.3 VARIOUS APPLICATIONS AND MODELS
1.3.1 INDUSTRIAL PANELS
The so-called "industrial panels" are for environments where intense heat is required, especially
for industrial processes as well as drying processes. Industrial panels have a higher surface
temperature than any other heating panels and are not intended for private users (it requires
special security precautions are taken).
1.3.2. WALL AND CEILING PANELS
In order to heat a room optimally,
MAREX IR
HEATING panels are attached to the ceiling. The radiation
can be optimized. Even more space can thus be saved.
MAREX
IR
HEATING panels are light enough to be integrated into existing ceiling systems. Please note
the necessary details for instructions described below (see section 3.1).
MAREX
IR
HEATING panels can be optimally used as an additional or main heating system. Due to the
thin and light structure and the differences in surface design, the panels are compact and suitable
for almost all walls (please notice the instructions for installation in section 3.1). Depending on the
position of the suspension,
MAREX IR
HEATING panels have a convection heat share of almost 0%.
