105
ADD WATER
CHECK AND MODIFY (STABILIZE) WATER HEAT
CHECK AND ADJUST PH VALUE
Implementation of the swimming for the loading
of Orlando Premium swimming pool
MISSING, ORIENTATION AND RECOMMENDED MORE MATERIAL
Before commencing excavation work, we recommend careful consideration of the
swimming pool taking into account the incorporation of the pool into the surroun-
dings and also the finishing costs; the orientation of the collector with regard to
the slope of the terrain, for the sake of ease of pooling, filtration and other ac-
cessories.
Swimming pool Orlando Premium 4.6 x 1.2 - circle
Diameter of trench heel (minimum) - 490 cm; Indicative amount of concrete for
every 10 cm of obsyp height - 0.22 m
3
; Nopic foil - approximate length - 15 m.
Orlando Premium Pool 3,66 x 1,20 x 5,49 m - oval
Excavation trench size (minimum) - 400 x 583 cm; Indicative amount of concrete for
every 10 cm of obsyp height - 0.24 m
3
; Nopic foil - approximate length - 17 m.
Swimming pool Orlando Premium 5,48 x 1,22 m - circle
Excavation foot diameter (minimum) -580 cm; Orientation of concrete for every
10 cm of obsyp-0.27 m
3
; nopic foil-approximate length-22 m
IMPORTANT: The collector, filtration and water heating connection is standard
under the ground. It is therefore necessary to protect the pool hoses from the
pressure of the soil. We recommend using a DRYING TUBE with a diameter of min.
100 mm and the length corresponding to the intended use (see pool layout and
accessories in Figure B-1).
IMPORTANT: The basic dimensions of the pool serve primarily to determine the ba-
sic construction dimensions in the preparation of the site. The actual dimensions of
the pool are given by the structure of the lower and upper frame, which is rounded
by rounded bars and the actual construction. When planning adjacent buildings,
such as roofing, stage, etc., it is necessary to take into account the actual dimensi-
ons, not the basic dimensions.
Excavation
Excavation for the pool body should be done either mechanically or manually, and
so that the heel tread dimension is at least 15 cm larger by the circumference than
the exact size of the pool. The area around the pool is especially necessary for
mounting purposes.
For oval swimming pools, excavation must be done so that the transverse struts
of the pool can be installed. The dimensions of the trench must correspond to the
sketch of the pool.
If the collector is located below the ground level, the trench shape needs to be
adjusted accordingly in order to build an assembly shaft to access the collector (see
Figures 6-1 and 6-2). The mounting shaft should be about 35 x 55 cm in size so that
it can be covered with a 40 x 60 cm standardized board. Therefore, the excavation
for the shaft should be about 80 cm wide, about 50 cm from the pool wall and deep
EN
Summary of Contents for Orlando Premium 10310019
