Marina S390, Quick Start Manual

 MAINTENANCE 

Check engine oil level









Change engine oil







Clean the air filter



Check spark plug





Replace air filter



Clean air intake cover



Check silencer



Sharpen or replace of blade



Check for loose parts





Clean the scarifier







 For a four stroke engine, check the oil level and 

change the oil when dirty. For further explanation, 

see ENGINE INSTRUCTION BOOK.



 Frequently check the mower and ensure that all 

deposits are removed from beneath the deck.



 Take care, the exhaust muffler may be very hot.

Caution!  Switch off the motor and disconnect 

the spark plug before undertaking any mainte-

nance work.



 Frequently remove the wheel screws clean whith 

petroleum and oil before replacing. Ball bearings must 

be greased before remounting.



 Frequently check the blades for damage.



 The lawn mower must be checked by a SERVICE 

DEALER.

BEFORE EVER

Y USE

AFTER FIRST

 2 HOURS

EVER

Y 5 HOURS OF OPERA

TION

OFTEN

EVER

Y 25 HOURS OF OPERA

TION

AT

 THE BEGINNING OF EVER

Y 

SEASON

PRIOR T

O 

ST

ORING

EVER

Y 50 HOURS OF OPERA

TION

EVER

Y 100 HOURS OF OPERA

TION

EN - 5

english

AERATOR S390 - S500 WITH SPRING SHAFT

The spring shaft is designed to remove moss 

and dry grass from the turf.

mm above the ground, on any type of ground.
For transport, the shaft must be lifted from the ground 

by operating the appropriate lever.

Before using the aerator, mow the lawn with a mower.
Unlike the shaft with floating or fixed knives, the spring 

tips do not have to impact the ground.
Recommended  working  depth  for  shaft  with  fixed  or 

floating blades is 3 mm under the ground, maximum 

depth 5 mm on hard ground and 10 mm on soft ground.
Recommended working depth for the spring shaft is 2