For more information and installation guides,
visit our website: marinco.com
marinco.com
ZX449
MAR_TL_032_0112
EEL Cordset operations manual
Product Care
Your MARINCO shore power cord set is intended for use outdoors. To prolong the life of
the cord set, store indoors when not in use.
The metal parts of your MARINCO EEL cord set are made to resist corrosion. In a salt
water environment, life of the product can be increased by periodically cleaning the
exposed parts with fresh water, drying and spraying with a moisture displacement aerosol.
A soiled cable can be cleaned with grease cutting household detergent. If you’re basic
soap and water doesn’t do the job, there are cord cleaners available through most marine
retailers. A periodic application of vinyl protector will help both ends and cable maintain
their original appearance.
DANGER
!
In case of Salt Water Immersion:
Rinse plug end or connector end thoroughly in fresh water, shake or blow out excess
water and allow drying time. Spray with a moisture displacement before re-use. Applying
Dielectric Silicone Compound or Grease to the connections will fight oxidation and to
improve conductivity. Dielectric grease is available at most marine supply stores.
Product registration
All product registration is available on line for your convenience. Please start at the
marinco.com website. Navigate to the Support Center and complete the “Product
Registration Form”. We recommend that you keep the purchase receipt of you new product
with the Operators manual and document the “Date Code” for future reference. Date Code
can be found on the warning tag as well as stamped on the cord 12 inches from the end.
MARINCO POWER PRODUCTS LIMITED WARRANTY
Subject to the exclusions and limitations detailed below, Marinco warrants to the original
consumer that MARINCO Power Products will be free from defects in materials and
workmanship under normal use and service for a period of sixty (60) months from the
original consumer’s date of purchase.
For purposes of this warranty: (i) “original consumer” is defined as the purchaser who
first uses the product after its initial installation or, in the case of products designed for
nonpermanent installation, the first owner who uses the product; and (ii) “Marinco” is
defined as Actuant Electrical, Inc., a New York corporation, doing business as Marinco.
OBTAINING WARRANTY SERVICE
In order to obtain the applicable warranty on a product, the original consumer must: (i)
notify Marinco of any defect, malfunction or nonconformity within thirty (30) days after
discovery of such defect, malfunction, or nonconformity, and (ii) obtain a Return Material
Authorization Number (“RMA”) from Marinco.
Instructions for obtaining an RMA are available at www.Marinco.com. Unless otherwise
prohibited by applicable law: (i) proof of purchase is required at the time warranty services
are requested, and (ii) all costs associated with returning the product to Marinco for
warranty service shall be the sole responsibility of the original consumer.
Replacement products may be new or refurbished. If Marinco repairs or replaces the
product, the repaired or replaced product shall be warranted for the remaining time of the
original warranty period or for ninety (90) days from the date of repair, whichever is longer.
