22
Utilities :
Setup
Auto Picture Setup
#
: Auto adjust the image position, phase and size
Auto Color Gain
#
: Auto Color Calibration (See appendix)
Wide Screen Mode detection
#
:
Recognize the wide screen mode coming from ARGB port
-
Off
-
1280x768
-
1366x768
Manual Clock
#
:
Adjust the image horizontal size
Manual Phase
#
:
Fine tune the data sampling position (adjust image
quality)
Auto Source Seek :
- Auto :
: OFF / ON
ON – Auto source select always enable
OFF – Disable auto source select function
- Setup
Selection for the corresponding input sources detection
HD/SD SDI 1
: OFF / ON
HD/SD SDI 2
: OFF / ON
VGA
: OFF / ON
DVI
: OFF / ON
HD Component
: OFF / ON
Composite 1
: OFF / ON
Composite 2
: OFF / ON
S-Video
: OFF / ON
SD Component
: OFF / ON
The corresponding input port name display on OSD menu will disappear once
setting “OFF”.
Auto Power :
OFF / ON
ON – Enable soft power off function if absence of input signals
OFF – Disable soft power function
Video Standard (SD)* : Auto / NTSC / NTSC 4.43 / PAL / PAL M / SECAM
Image Orientation : Normal / Horizontal flip / Vertical flip / Rotate
Gamma : 1.0 / 1.6 / 1.7 / 1.8 / 1.9 / 2.0 / 2.1/ 2.2 / 2.3 / 2.4 / 2.5 / 2.6 / User Setting
De-interlacing Mode*
AFM
: Auto Film Mode
TNR
: Temporal Noise Reduction
MADI
: Motion Adaptive De-interlacing
LADI
: Low Angled De-interlacing
[See Appendix for AFM, TNR, MADI, LADI function description]
OSD
OSD position :
H POS
: Move the OSD menu image horizontally
V POS
: Move the OSD menu image vertically
OSD Timeout (sec) : ON – 60 : Adjust the OSD menu timeout period in a step of 5
seconds (max 60 seconds)
ON =
Continuous to display OSD menu.
60 = 60 seconds later will turn off the OSD menu.
Language : English / Chinese : Select OSD menu language display
Transparency :
: OFF / ON: Set OSD transparency
Display Input :
: OFF / ON: Display input port name when source switching
Zoom
Zoom level :
: Enable the zoom in function on the image displayed.
Use “+” button to zoom in the image
Use “-“ button to decrease the zoomed image
