17
Two-Voice Pro QuickStart Guide
Customizing Power-On Default Settings
Customizing Power-On Default Settings
You can customize some of the power-on default settings of the TVS-PRO.
The following parameters can be stored and will be recalled following a power up operation:
In the Mini-Sequencer section:
• MIDI clock divider
• Gate length
In the Keyboard section:
• MIDI channel
• Velocity curve
• Bend range
• Keyboard mode
• Retrigger ON or OFF on first press in unison or split modes
• Split point
To store the current panel configuration:
• Set the any of the above panel settings to your preference.
• In the Sequence/Song Storage section, make sure the TVS-PRO is in Panel mode. If it is, “PA” will be
shown in the LED display.
• If “PA” is not shown in the LED display, press the SEQUENCE MODE button, then press the UP/DOWN
arrow buttons to select “PA” then press the RECALL button.
• Press “STORE.” “PA” will begin flashing in the LED display.
• Press “STORE” again. The settings are now stored.
Now, whenever you power up the TVS-PRO, it will default to the settings you have chosen.