User’s Guide
5
232 - RS-232 settings
232d
Output
Disabled
232E Output
Enabled
300
300
baud
600
600
baud
1200
1200
baud
2400
2400
baud
4800
4800
baud
9600 9600
baud
7-1E
7 data bits, 1 stop bit, even parity
7-1o
7 data bits, 1 stop bit, odd parity
7-2E
7 data bits, 2 stop bits, even parity
7-2o
7 data bits, 2 stop bits, odd parity
7-2n
7 data bits, 2 stop bits, no parity
8-1E
8 data bits, 1 stop bit, even parity
8-1o
8 data bits, 1 stop bit, odd parity
8-1n
8 data bits, 1 stop bit, no parity
8-2n
8 data bits, 2 stop bits, no parity
Ft F
Full data (n units)
Ft n
Numeric data only
out - Outputs selection (other than RS-232)
SP d
Set point outputs disabled
SP E
Set point outputs enabled
bcd d
Mitutoyo BCD output disabled
bcd E
Mitutoyo BCD output enabled
nPOL
Mitutoyo readings without polarity (absolute value)
POL
Mitutoyo readings with polarity; positive for
compression (CW), negative for tension (CCW)
Et d
External trigger disabled
Et E
External trigger enabled in edge mode
Et L
External trigger enabled in level mode
EtHL
Data capture during high to low transition of trigger signal
EtLH
Data capture during low to high transition of trigger signal
Aout - Automatic output (RS-232)
no Automatic
output
disabled
1
Every sample transmitted
2
Every 2nd sample transmitted
4
Every 4th sample transmitted
8
Every 8th sample transmitted
16
Every 16th sample transmitted
32
Every 32nd sample transmitted
64
Every 64th sample transmitted
128
Every 128th sample transmitted
AoFF - Automatic shutoff settings
no Disabled
