User’s Guide
9
LB
Switch units to pounds
KG
Switch units to kilograms
N
Switch units to Newtons
G
Switch units to grams
OZIN
Switch units to ounce-inches
LBIN
Switch units to pound-inches
KGMM
Switch units to kilogram-millimeters
NCM
Switch units to newton-centimetes
NM
Switch units to newton-meters
ET
Enable External trigger mode
ETD
Disable External trigger mode
ETE
Edge triggered External trigger mode
ETL
Level triggered External trigger mode
HL
Reading captured on a high to low transition
LH
Reading captured on a low to high transition
SP
Enable set point
SPD
Disable set point
SPHn
High set point (+ for CW, - for CCW)
SPLn
Low set point (+ for CW, - for CCW)
CUR
Current mode (real time display)
PT Peak
Tension
mode
PC
Peak Compression mode
PKCW
Peak Clockwise mode
PKCCW
Peak Counter Clockwise mode
CLR
Clear peaks, start a new average, or external trigger test
Z
Zero display and perform the CLR function
?
Request the displayed reading
?C
Request the current reading
?PT
Request the peak tension reading
?PC
Request the peak compression reading
?CW
Request peak clockwise reading
?CCW
Request peak counter-clockwise reading
?ET
Request the reading obtained during the External trigger mode
?A
Request the average reading obtained during the Average mode
FLTCn
Digital filter for current (displayed readings). n=1,2,4,8
FLTPn
Digital filter for peak readings. n=1,2,4,8
FLTAn
Analog filter (2.5 Hz). n=1,0. 1=on, 0=off
FULL
RS-232 transmission with units
NUM
RS-232 transmission without units (only numeric values)
MIT
Enable Mitutoyo output
MITD Disable
Mitutoyo
output
POL
Mitutoyo outputs with polarity. (+ for compression (CW),
- for tension (CCW)
NPOL
Mitutoyo outputs without polarity (absolute value)
