Thank you!
Thank you for purchasing a Mark-10 Model M7I Advanced Force/
Torque Indicator. We are confident that you will get many years of
service from this product.
The M7I is designed to work with a wide range of Mark-10 Plug &
Test
®
remote smart force and torque sensor. Please read through
this Quick Start Guide and the complete User’s Guide before us-
ing the gauge.
Model M7I Advanced Force/Torque Indicator
IMPORTANT SAFETY CONSIDERATIONS
Force and torque measuring instruments are sensitive and must be treated with
care. Please review the safety information provided in the User’s Guide prior to
operating the indicator.
LIST OF INCLUDED ITEMS:
Quick Start Guide
OVERVIEW
To power on the indicator, press the button. Press and hold to power off.
The indicator may be powered either by the internal rechargeable battery or an
AC adapter/charger. The battery will last approximately 7 hours with the backlight
turned on, and 24 hours with the backlight turned off before recharging is necessary.
The M7I indicator must be used with a Plug & Test
®
remote smart sensor. All
configuration and calibration data is saved within the sensor’s connector. Although
the menu may be accessed if the sensor is not connected, changes will not be
saved. Refer to the M7I User’s Guide for further details.
LITERATURE & SOFTWARE DOWNLOADS
Download at: www.mark-10.com/downloads
1. User’s guides
(PDF)
Provided for all Mark-10 instruments. Locate the user’s guide for this product
and read it thoroughly before use.
2. USB driver
For Mark-10 instruments and the model RSU100 RS-232 to USB converter.
Required for communication with a PC. Follow the installation instructions
provided in the user’s guide.
3. MESUR
®
family of software
– see below.
INSTALLING MESUR
®
SOFTWARE
Mark-10 offers three data collection applications:
MESUR
®
Lite
Free basic data acquisition application, for data tabulation and exporting to Excel.
Compatible with gauges only, not test stands.
MESUR
®
gauge / MESUR
®
gauge Plus
Data tabulation, graphing, analysis, and reporting, with user-configurable start and
stop triggers and other tools. Compatible with gauges and test stands for load
vs. time or load vs. travel. MESUR
®
gauge Plus adds test stand motion control
coordination. Both applications can be evaluated for 90 days.
PC requirements
Compatible with PCs running Microsoft Windows 7 or later. Minimum monitor
resolution is 1108 x 758. A USB or RS-232C serial port is required. If USB
communication is required, install the Mark-10 USB driver.
Part No.
Description
Qty.
M7I
M7IE
M7IU
M7IA
1
12-1049
12-1049
12-1049
12-1049
Carrying Case
1
AC1030
AC1031
AC1032
AC 1035
AC adapter w/US, EU, UK, or
AUS prong
1
08-1026
08-1026
08-1026
08-1026
Rechargeable NiMH Battery
(inside gauge)
1
-
-
-
-
Certificate of calibration
1
09-1165
09-1165
09-1165
09-1165
USB cable
2
3
