Plug & Test
®
Smart Force & Torque Sensors
User’s Guide
12
10 SERIES FS05 FORCE SENSORS
10.1 Unpacking and Assembly
Carefully remove the sensor from the box. Remove the red protective cap
covering the circuit board. No assembly is required.
10.2 Installing to Model F105 / F305 / F505 / F505H Test Frames
Series FS05 force sensors mount directly to the crosshead. Match the gold-
plated pads on the top surface of the load cell block with the pins in the
underside of the crosshead, as shown at left.
While holding the force sensor in place with one hand, use an Allen wrench
with the other hand to tighten the screw that joins the crosshead to the force
sensor, as shown at left.
Optionally cover the screw head with the included black plastic cap.
10.3 Overview
Series FS05 is compatible with Series F force testers only. Tension and compression force may be
applied to the threaded load cell shaft. Attachments may be threaded onto the shaft.
Finger-tighten only
.
10.4 Specifications
Accuracy:
±0.1% of full scale
Safe overload:
150% of full scale
Operating temperature: 40ºF – 100ºF [5ºC – 38ºC]
Operating humidity:
96% max. (non-condensing)
Weight:
FS05-012 – FS05-100: 1.2 lb [0.5 kg]
FS05-200 – FS05-500: 1.3 lb [0.6 kg]
www.
GlobalTestSupply
.com
Find Quality Products Online at:
sales@GlobalTestSupply.com
