Series TT02 Digital Torque Tool Testers
User’s Guide
1
Thank you…
Thank you for purchasing a Mark-10 Series TT02
digital torque tool tester, designed to measure the
torque produced by manual, electric, and
pneumatic torque tools.
With proper usage, we are confident that you will
get many years of great service with this product.
Mark-10 instruments are ruggedly built for both
laboratory and industrial environments.
This User’s Guide provides setup, safety, and
operation instructions. Dimensions and
specifications are also provided. For additional
information or answers to your questions, please
do not hesitate to contact us. Our technical
support and engineering teams are eager to assist
you.
Before use, each person who is to use a Series TT02 digital torque tool tester should be fully
trained in appropriate operation and safety procedures.
TABLE OF CONTENTS
OVERVIEW
.........................................................2
POWER
...............................................................3
SETUP
................................................................4
HOME SCREEN AND CONTROLS
...................6
OPERATING MODES
.........................................8
CHANGING THE UNITS
.....................................8
DIGITAL FILTERS
..............................................9
SET POINTS
.......................................................9
BREAK DETECTION
........................................10
FIRST / SECOND PEAK
..................................12
DATA MEMORY AND STATISTICS
................14
COMMUNICATIONS AND OUTPUTS
.............15
CALIBRATION
.................................................19
PASSWORDS
...................................................23
OTHER SETTINGS
...........................................24
SPECIFICATIONS
............................................27
www.
.com
information@itm.com
1.800.561.8187
