Mark-10 TSTM-DC, User Manual

Series TSTM-DC Test Stands    

   User’s Guide

14

Label 

Description 

+ or –

Increases or decreases the value 

ENTR

Returns to the Test Function Setup menu

ESC

Exits the function without saving changes 

4.10 Units of speed (UNITS)

This setting corresponds to units of speed and travel measurement.  
  

Default setting: RPM 
Available settings: RPM, °/sec 

Label 

Description 

+ or –

Cycles through the available settings 

ENTR

Returns to the Test Function Setup menu

ESC

Exits the function without saving changes 

 
4.11 Programmable button function (KEYS)

Three button function modes are available: 

1.   Maintained 

The torque plate will rotate continuously once the button has been pressed and held. 
Subsequently pressing 

STOP

 will stop torque plate motion. 

  
2.   Momentary 

The torque plate will rotate only if the button is held down. Releasing the button will stop 
movement immediately. 
  

3.   Auto  

Holding down the button for more than 0.5 second will enter momentary mode, at which time 
an audible indicator will sound and the LED indicator on the button pushed will be illuminated. 
A short tap on the button will operate the test stand in maintained mode. Pressing 

STOP

during maintained mode will stop torque plate rotation. 
  

Default setting: maintained 
Available settings: maintained, momentary, auto 

Label 

Description

+ or –

Cycles through the available settings 

ENTR

Returns to the Test Function Setup menu

ESC

Exits the function without saving changes 

U N I T S :          R P M      

E S C        −      +      E N T R 

K E Y S :   M A I N T A I N E D 

E S C        −      +      E N T R