Model WT3-200 Wire Terminal Pull Tester
User’s Guide
1
Thank you…
Thank you for purchasing a Mark-10 WT3-200 wire
terminal pull tester, designed for pull test applications
up to 200 lbF (1,000 N).
With proper usage, we are confident that you will get
many years of great service with this product. Mark-10
instruments are ruggedly built for many years of service
in laboratory and industrial environments.
This User’s Guide provides setup, safety, and operation
instructions. Dimensions and specifications are also
provided. For additional information or answers to your
questions, please do not hesitate to contact us. Our
technical support and engineering teams are eager to
assist you.
Before use, each person who is to use the WT3-200 should be fully trained in appropriate
operation and safety procedures.
TABLE OF CONTENTS
OVERVIEW
.........................................................2
POWER
...............................................................3
MECHANICAL SETUP
.......................................4
HOME SCREEN AND CONTROLS
...................6
OPERATING MODES
.........................................8
DIGITAL FILTERS
..............................................8
SET POINTS
.......................................................9
DATA MEMORY AND STATISTICS
................10
COMMUNICATIONS
........................................12
CALIBRATION
.................................................18
PASSWORDS
...................................................22
OTHER SETTINGS
...........................................23
SPECIFICATIONS
............................................26
