Thank you!
Thank you for purchasing a Mark-10 WT3-201
wire terminal pull tester, designed for applications
up to 200 lbF (1,000 N). With proper usage, we
are confident that you will get many years of great
service with this product. Mark-10 instruments are
ruggedly built for many years of service in labo-
ratory and industrial environments. Please read
through this Quick Start Guide and the complete
User’s Guide before using the gauge.
Model WT3-201 Wire Crimp Pull Tester
IMPORTANT SAFETY CONSIDERATIONS
Force gauges are sensitive instruments that must be treated with care. Please
review the yellow safety information card included in the box, as well as the
safety information in the User’s Guide prior to operating the gauge.
LIST OF INCLUDED ITEMS:
POWER
Quick Start Guide
Press the button to power on the tester. Press and hold to power off. The
tester may be powered either by the internal rechargeable battery or an AC adapter/
charger. The battery will last approximately 7 hours with the backlight turned on,
and 24 hours with the backlight turned off before recharging is necessary.
Qty.
Part No.
Description
1
08-1026
Rechargeable NiMH battery (inside the tester)
1
-
Certificate of calibration
1
09-1165
USB cable
1
AC1030 / AC1031 /
AC1032 / AC1035
AC adapter/charger with US, EU, UK, or AUS prong
1
WT3002
Ring terminal fixture (optional)
1
WT3003
Machinable blank terminal fixture (optional)
1
WT3004
Carrying case (optional)
2
3
LITERATURE & SOFTWARE DOWNLOADS
Download at: www.mark-10.com/downloads
1. User’s guides
(PDF)
Provided for all Mark-10 instruments. Locate the user’s guide for this product
and read it thoroughly before use.
2. USB driver
For Mark-10 instruments and the model RSU100 RS-232 to USB converter.
Required for communication with a PC. Follow the installation instructions
provided in the user’s guide.
3. MESUR
®
family of software
– see below.
INSTALLING MESUR
®
SOFTWARE
Mark-10 offers three data collection applications:
MESUR
®
Lite
Free basic data acquisition application, for data tabulation and exporting to Excel.
Compatible with gauges only, not test stands.
MESUR
®
gauge / MESUR
®
gauge Plus
Data tabulation, graphing, analysis, and reporting, with user-configurable start and
stop triggers and other tools. Compatible with gauges and test stands for load
vs. time or load vs. travel. MESUR
®
gauge Plus adds test stand motion control
coordination. Both applications can be evaluated for 90 days.
PC requirements
Compatible with PCs running Microsoft Windows 7 or later. Minimum monitor
resolution is 1108 x 758. A USB or RS-232C serial port is required. If USB
communication is required, install the Mark-10 USB driver.
