background image

The 

OUTPUT 

menu  configures  the  output 

settings.
The  following  submenus  are  included  in  this 
section:

MASTER VOLUME

: volume of the drums, from   

-45dB to +6dB

OUT STEREO

: enable stereo output (default)

OUT LEFT HAND

: reverse left and right in the stereo output

OUT MONO

: enable mono output 

When the Sound Module is powered off, the instruments are returned to their default 
OUTPUT settings (stereo, 0dB).
The character '

>

' means 'option selected'. 

The character '

*

' is the row selector; pressing OK selects the option in that row.

9

The 

SYSTEM

  menu  is  used  to  upgrade  the 

firmware of the Sound Module and of each pad.
The  following  submenu  is  included  in  this 
section:

SW  REVISION

:  this  displays  the  firmware 

version of the Sound Module, DSP (Digital Signal

SW UPGRADE SM

: firmware upgrade of the Sound Module 

- Power off the Sound Module;
- Disconnect all Sound Module cables: 1/4" instrument cables, aux in, headphone and
BUS cables;
- Copy the mdf firmware file onto the SD card from your computer, and then put the
SD card back into the Sound Module;
- Turn on the Sound Module;
- Press the MENU button, then select: SYSTEM -> SW_UPGRADE_SM
The following warning will appear:

SW UPGRADE
SOUND MODULE
PRESS OK

- Press OK (or back to skip);
- Wait for one minute; and when white buttons (CREATIVE FX, MENU, LOOP REC)
start blinking, you can power off the Sound Module to complete the upgrade
procedure.
Warning: if you power off the Sound Module during the firmware upgrade, the Sound
Module will not start again!

*MASTER_VOLUME
>OUT_STEREO
 OUT_LEFT_HAND
 OUT_MONO

*SW_REVISION
 SW_UPGRADE_SM
 SW_UPGRADE_PAD
 SW_RECOVERY_USB
 RAW_DATA

Processing), and the firmware version of each pad.

3.4 -

 OUTPUT

3.5 -

 SYSTEM

When  the  Sound  Module  is  powered  off,  the 
instruments  are  returned  to  their  default  MIDI 
settings (off).

*OUT_ENABLE
>OUT_DISABLE
 OUT_ADDR

The character '

>

' means 'option selected'. 

The character '

*

' is the row selector; pressing OK selects the option in that row.

Summary of Contents for YES

























Reviews: