To create a custom kit with your own mix of
instruments and effects, use the following
procedure:
a.
Select the instruments and effects you want
to include
b.
Press CREATE KIT and select the USER_KIT
location where you would like to store your kit.
Then press OK, and the KIT will be saved.
The stored user kit will not be deleted after a power off.
To load a
USER KIT
, press the
KIT
button, and scroll to the desired kit.
The
KIT
button gives you access to the drum kits
available.
The symbol “
>
” identifies the currently loaded
kit. The same symbol (>) is also used to point to
the kit that is in the process of loading. Use the
UP/DOWN
keys or the rotate left/ rotate right
“
VALUE
” wheel to choose the desired kit.
When the cursor (
>
) stays on a kit name for more than one second, the kit loading will
automatically start.
The USER kits are available at the end of the kit list.
>01-Natural
02-Studio
03-Vintage
04-Power
*USER1_SAVE
USER2_SAVE
USER3_SAVE
USER4_SAVE
11
6. CREATE KIT
7. KIT
Product specifications are subject to change without notice.
LOOP REC
: when you press this button, LOOP
recording will start at the current metronome
setting. The first two bars are your count-in
(they will be not recorded), and then the
following four bars will be recorded and looped.
LOOP OPTIONS
:
STOP will stop the recorded loop.
START will start the recorded loop.
Once the Sound Module is powered off, the recorded loop will be deleted.
*STOP
PLAY
5. LOOP
