background image

When you press the button for any individual instrument (SNARE, TOM 1, RIDE, etc.), 
the following menu will appear on the screen:

KIT
VOLUME
COMPRESSOR 

(only for Snare, Kick, and Toms) -> PRESET, VALUE%, ATTACK, 

RELEASE, RATIO

REVERB
LAYER
PLAYER IMMERSION
TRIGGER

 -> THRESHOLD, ACTION, GAIN

RIM 

(only for snare and toms) -> FULL RIMSHOT SOUND, RIM SOUND, REVERB RIM,

 

VOLUME RIM, GAIN

CALIBRATION 

(only for snare and hi-hat)

CONFIGURE
RESTORE FACTORY

1.1 -

 KIT

Selecting 

KIT

  from  an  instrument's  menu  will 

change the sound of that instrument.
The first instrument shown is the current, active 
instrument.
While scrolling through the choices, if you stop 
on  an  instrument,  after  2  seconds  it  will  be 
automatically loaded.

Pressing  the  BACK  button  (

<

)  will  restore  the 

original sound.

To return to the INSTRUMENT MENUS, press OK.

1. Instrument Menus

The last letter of the instrument's name will appear as 

P

L

 or 

K

 (for example, “Electro K”).

 

P

 indicates that Player Immersion can be used with the selected instrument; 

indicates 

that Layer is available for that instrument; and 

K

 means that Kaleidoscopic is available.

When  you  change  the  drum  kit  or  power  off  the  Sound  Module,  the  instruments  in 
whatever kit you have selected will return to their default settings.
To save your configuration, use the "CREATE KIT" procedure (see page 11).

VOLUME

, found in the instrument's menu, will 

change  the  volume  level  of  the  selected 
instrument.
When  the  Sound  Module  is  powered  off,  all 
instruments  are  returned  to  their  default 
volumes.

2

* Kit:.. MPX Bronze  P
  VOLUME
  COMPRESSOR
  REVERB

  Kit: 01-Natural
* VOLUME  -4.20DB
  COMPRESSOR
  REVERB

1.2 -

 VOLUME

To save your configuration, use the "CREATE KIT" procedure (see page 11).

Summary of Contents for YES

























Reviews: