RESTORE FACTORY
, found in the instrument
menus, restores the factory sound and all the
TRIGGER values of the PAD selected.
The data is stored in the instrument's memory and
will not change after the Sound Module is powered
down.
6
The Creative Effects associated with each kit will
be applied to all instruments within the kit.
When you press the
CREATIVE FX
button, the
following sub-menu will appear:
- PLAYER IMMERSION:
percentage (%) of Player Immersion (if available in the kit
selected). 0 = the sounds have been recorded from the drummer's perspective, 100 = the
sounds are heard from the audience perspective.
- LAYER
: percentage of the additional sound layer that can be added on top of
instruments (if available to the selected kit).
- KALEIDOSCOPIC
: the percentage value of the Kaleidoscopic effect (activation of
random samples), if available for the kit selected.
Please refer to the documentation included with your drums to see the list of Creative
Effects available for each kit.
PLAYER_IMMERSION
TRIGGER
CONFIGURE
*RESTORE_FACTORY
*PLAYER_IMMERSION
LAYER
KALEIDOSCOPIC
1.11 -
RESTORE FACTORY
2. CREATIVE FX
To configure pads, use the following procedure
:
1) Turn off the Sound Module;
2) Connect the instrument directly to the Sound Module;
3) Turn on the Sound Module;
4) Select the CONFIGURE option. The following message will appear: “CONFIGURE
WARNING! CHANGE PAD NAME.” Press OK;
5) Note: if the above points (1-2-3) of this procedure have not been performed, the
following message will appear: “ERROR! MORE THAN ONE PAD FOUND!”;
6) Press PAD 1, PAD 2, PAD 3, or PAD 4 to configure the instrument as an auxiliary pad for
special sounds. The following message will appear: “CONFIGURE. NOW PRESS NEW
INSTRUMENT NAME”. Press BACK to skip;
7) As soon as the PAD button has been pressed, turn off the Sound Module and re-connect
the Sound Module and the instrument in the standard way.
If you assign more than one pad to one instrument (example PAD 1), pads will generate
the same sound but some functions such as
TRIGGER
,
ACTION
,
GAIN
, etc. will be
disabled, showing the message “
PAD CONFLICT
”.
To restore the original instrument setup, choose the
RESTORE FACTORY
option in the
instrument's menu.