2-7
Nº 320S
Basic Operation
4. stereo record output connectors
Provide left and right-channel analog audio output at fixed
levels. Two single-ended (RCA) connectors labeled 1 and 2 are
available to output single-ended signals to recording components
such as CD-Rs and tape decks.
The
Rec.Out
parameter can be used to assign the
record output
connectors to the desired input(s). It is recommended to use
the
Name
parameter to associate inputs with the correct
recording components to prevent possible record feedback
loops.
Note
Nº 320S volume controls, including master volume and
balance
, do not affect
record output
levels.
5.
& slave in communication ports
Provide “links” to compatible Mark Levinson components,
allowing the Nº 320S and other linked components to share
controls such as display intensity, input naming, standby,
playback, input selection, and record. Two 8-pin modular
RJ-45 jacks labeled
and
slave in
are available.
The
communication port can be connected to a Mark
Levinson power amplifier that offers Link communication
ports. The
slave in
communication port can be connected to
a compatible Mark Levinson digital audio processor or digital
transport that offers Link communication ports.
Note
Refer to
Linking
(page 2-9)
BEFORE
linking the Nº 320S to
other Mark Levinson components.
(continued)
