2-17
Nº 320S
Basic Operation
(continued)
4. enter button
Selects and deselects menu items when the
setup menu
is
open. The
enter button
performs no function during normal
operation.
5. volume ± buttons
Adjust master volume level. Pressing the
volume ± buttons
increases (+) and decreases (–) master volume level in 1.0dB
increments up to 23.0dB and in 0.1dB increments above
23.0dB. The minimum master volume level setting is OFF. The
MaxVol
parameter can be used to determine the maximum
master volume level setting in 0.1dB increments between 40.0
and 80.0dB. The factory-default maximum master volume
level is 80.0dB.
The
Offset
parameter can be used to determine individual
input volume level offsets in 0.1dB increments between –20.0
and +20.0dB. The factory-default input volume level offset is
0.0dB. Whenever an input is selected, the Nº 320S automatically
applies the
Offset
parameter setting to master volume level.
Note the following about using the volume ± buttons:
•
Pressing and releasing the
volume ± buttons
accommodates
fine, precise adjustments.
•
Pressing and holding the
volume ± buttons
for longer than
1.5 seconds accelerates the rate of change to accommodate
large adjustments.
Note
•
The master volume control does not affect
record output
levels.
•
All Nº 320S volume controls, including master volume
and
balance
, are deactivated when
SSP mode
(page 4-8)
is activated.
6. select ± buttons
Select the desired input. Pressing the
select ± buttons
scrolls
through all activated inputs. The front panel display indicates
the name and volume level of the selected input.
Select ±
button
scrolling does not include deactivated inputs – inputs
for which the
Name
parameter has been set to
unused
.
