4-10
Controls & Modes
Mark Levinson
7. Press and hold the front panel or remote control
setup button
until the
Name
parameter for the selected input opens on the
front panel display as shown to the left.
•
The front panel
setup LED
lights red to indicate that the
setup menu
is open.
8. Press the front panel or remote control
enter button
once to
select the
Name
parameter and access the
custom names list
.
•
The current input name will blink on the front panel
display as shown to the left to indicate that a new input
name can be selected from the
custom names list
.
9. Rotate the front panel
volume knob
or press the remote
control
volume ± buttons
to scroll through all custom input
names until the
SSP
name appears on the front panel display
as shown to the left.
10. Press the
enter button
to select the
SSP
name, which activates
SSP mode
.
•
The
SAVING DATA
message will appear on the front panel
display as shown to the left to indicate that the
SSP
name
is being saved.
SSP (Surround Sound Processor) Mode (continued)
Name=INPUT 1
Name=_______
Name=SSP
SAVING DATA
Input 1
is used
here as an example
and may be substi-
tuted for whichever
input was selected
in step 3 (page 4-9).
